The Normx Scalex Instructions Scale The Analog. PID12 Siemens PID02 Analog Input Scale Library and Norm_X/Scale_X But when I inject the following volt values in the Analog input of the PLC the output values of the Two SCALE_X functions are not as shown in the table?! Examples: 1- At 2.5 V the output of the first SCALE_X function is 124.4141 ˚C and the output of the second SCALE_X function is 138.91 Ω but in the Reference table when the Temperature is 124. An analog input from an analog signal module or signal board using input in current is in the range 0 to 27648 for valid values
Siemens NormX ScaleX pt3 YouTube from www.youtube.com
An analog input from an analog signal module or signal board using input in current is in the range 0 to 27648 for valid values General NORM_X and SCALE_X instructions are used for scaling the value or we can use this instruction in analog value scaling.
Siemens NormX ScaleX pt3 YouTube
PLC program Explanation:-In network 1, we used NORM_X instruction for input value conversion To transform the analog value to the corresponding engineering units, normalize the input to a value between 0.0 and 1.0, and then scale it between -30.0 and 70.0. For example, here the input value is 0 to 27648 and this value needs to be normalized in linear scaled value range from 0.0 to 1.0.
Siemens NormX ScaleX pt1 YouTube. The SCALE_X and NORM_X instructions are used to scale and normalize parameter values within a specified range So input value will be converted from 0.0 to 1.0 scale range.
PID13 Siemens PID03 Analog Output Unscale Library and Norm_X/Scale. Example (LAD): normalizing and scaling an analog input value In this video, you will learn the scaling instructions in the PLC programming.Here we discussed the NORM_X and SCALE_X instructions in PLC.## Free PLC and SC.